LEDiL’S NEW HB-IP-2X6-O – FOR EFFICIENT WAREHOUSE AISLE LIGHTING

LEDiL introduces a new addition to its HB-IP-2X6 module range. The new HB-IP-2X6-O oval light distribution and highly efficient design is optimized especially for illumination of high racks and warehouse aisles. The HB-IP-2X6-O module features the standard IP-2X6 footprint and has an integrated silicone gasket which provides protection from dirt and water up to IP67. HB-IP-2X6-O is designed to work with high power LEDs from brands like Cree, Osram, Philips Lumileds and Nichia.

FEATURES

Developed especially for warehouse aisle lighting application
The standard IP-2X6 footprint
Optimized for Cree XM-L and Philips Lumileds Luxeon T LEDs

TYPICAL APPLICATIONS

FLARE-MAXI-T – LOW POLE STREET LIGHTING

LEDiL’s new addition to the FLARE family is FLARE-MAXI-T, low pole street lighting optic suitable for roads with bridge railings or smaller walking roads where mounting is below eye level. FLARE-MAXI-T can also be used in area lighting in parks and pathways. Typical luminaire mounting height is 0.8 meters and optics work on setups on both sides of the road or just on one side. FLARE-MAXI-T is designed for super high power LEDs like Philips Lumileds Luxeon M and Cree MK-R.

FEATURES

Low pole street and pathway lighting optic
Typical mounting height 0.8 m
Optimized for Philips Lumileds Luxeon M and Cree MK-R

TYPICAL APPLICATIONS

LEILA-WAS – LET YOUR WALLS SHINE

LEDiL’s well-established LEILA family expands with the new asymmetric LEILA-O-WAS optics. The LEILA-O-WAS is similar with LEDiL’s LAURA-O-WAS and EMILY-O-WAS optics. The LEILA-O-WAS optics are designed to be used in groups to provide even and uniform illumination to the walls. Typical installation distance from the wall is approximately 10-20 cm and optimal luminaire spacing 5-15 cm. The LEILA-O-WAS optics are designed for the range of LEDs from Cree, Osram, Seoul, Nichia and Samsung.

FEATURES

Similar with LAURA-O-WAS and EMILY-O-WAS optics
Designed to be used in groups with approx. 10 cm distance from the wall and with 5-10 cm spacing between luminaires
Designed for the range of LEDs from Cree, Osram, Seoul, Nichia and Samsung

TYPICAL APPLICATIONS

Wall washing applications
Interior architectural
Retail lighting
Outdoor facade lighting

FLORENCE-Z30 – REACHING INTO NEW HEIGHTS

FLORENCE-Z30 is new addition to LEDiL’s FLORENCE family of optic modules. FLORENCE-Z30 features 30° beam with good uniform light pattern and is designed to mid-bay lighting applications. FLORENCE-Z30 is designed to replace fluorecent lights and it’s great choice for office lights especially in higher installations with the optional FLORENCE-shade.

FEATURES

Good uniform light pattern
Designed to replace fluorecent lights
Typical installation height 5-8 meters
Medium narrow light distribution
Compatible with Zhaga Book 7 three row mid-power linear modules like Philips Fortimo LEDline 3R

TYPICAL APPLICATIONS

STRADA-2X2-T1 – REACHING FURTHER

LEDiL’s wide range of high quality street light optics grows with the new acquaintance of STRADA-2X2-T1. Its precise two-way IESNA Type I beam provides a very wide and symmetrical strip of light, making it ideal for narrow roads and paths with long pole distance and installations with tilted armature. As usual, the well-established 50 x 50 mm footprint allows future-proof upgrades and cost efficient luminaire construction. STRADA-2X2-T1 support all major LED models up to 5050 size packages.

FEATURES

LEDiL standard 50 x 50 mm footprint
IESNA Type I light distribution
Controlled smooth rectangular beam with great cutoff properties
Optimized for a range of 3535 size and compatible up to 5050 size LED packages

TYPICAL APPLICATIONS

STELLA-DWC2 – WIDER ANGLES, IMPROVED PERFORMANCE

STELLA-DWC2 is the latest addition to the growing lineup of LEDiL’s silicone products. It provides a very wide Type III beam pattern optimized for long pole distances and good roadway utilisation. LEDiL’s silicone products are well suited for all outdoor use with good thermal and UV resistance. Our long knowledge of optical design combined with the sustainable, ecological and durable materials makes STELLA-DWC2 excellent optic for your street lighting luminaires with European ME or IESNA Type III beam types

FEATURES

Self-sealing design simplifies luminaire design
Very good thermal and UV resistance
Very wide beam excellent for European ME3 and ME4 requirements with longer pole distances
Type III Medium beam pattern fulfilling most of the RP8 requirements
Compatible with up to 19 mm LES size
No house-side peaks
Precise light control and good cut-off

TYPICAL APPLICATIONS

Street lighting
Bridge lighting

RELATED PRODUCTS

FN14976_STELLA-DWC2 FN15189_STELLA-DWC2

LEDiL’S G2-ROSE-UV OPTICS – HIGHLY DURABLE AND VERSATILE

LEDiL’s new G2-ROSE-UV optics form a full family of lenses designed for high power UV-LEDs with dome. These silicone molded lenses are the most advanced lighting products on the market. Optical grade silicone material has a very good UV-transmission and can be used with UV LEDs, which even UV stabilized plastics are unfit for. Typical applications of lenses range from UV curing applications to NDT, forensics and counterfeit detection. G2-ROSE-UV lenses are also fully compatible with LEDiL´s FLORENTINA-2X2 and the upcoming 4X1 holders to achieve stylish, customizable and non-glaring results. With the wide range of different beam solutions available it is the most versatile and durable lens family yet released.

FEATURES

UV-resistant with no notable decrease in light transmission rates
Compatible with LEDs with dome up to 3535 size packages
FLORENTINA-2X2 and 4X1 compatibility
Very good thermal properties, suitable also for white LEDs

TYPICAL APPLICATIONS

NDT and curing applications
Anti-bacterial lighting

STRADA-2X2-T4-B – WIDE, BRIGHT AND LEAVING SHADOWS BEHIND

STRADA-T4-B is the latest addition to LEDiL´s growing street light optics. Providing a wide square-shaped beam pattern it is an ideal solution for large outdoor area and wide road illumination with great uniformity. Special care has been given to minimize light spilling to the house side without the need for additional light obstructing elements in the luminaire. With 50 x 50 mm module based footprint STRADA-T4-B allows easy integration and future-proof solution to all STRADA-2X2 compatible luminaires.

FEATURES

50 x 50 mm module based structure
Wide square-shaped beam (IESNA Type IV)
Great luminance uniformity
Optimized for a range of 3535 high power and compatible up to 5050 LED packages

TYPICAL APPLICATIONS

HB-2X2MX-M – THE NEW INDUSTRY STANDARD FAMILY KEEPS GROWING

LEDiL’s 2X2MX standard family expands with the medium beam pattern allowing higher installations than existing HB-2X2MX-W. Typical FWHM of 25 degrees is targeted for high bay installations in for example high storage and sports arenas requiring higher installation heights. Like all of LEDiL HB-modules, 2X2MX-M has DLC compliant beam pattern and highly efficient optics, designed to maximize performance of your luminaire. HB-2X2MX-M comes with an integrated silicone gasket allowing ingress protection against dust and dirt up to IP67. HB-2X2MX-M is based on LEDiL’s standard 2X2MX ecosystem offering a range of off-the-shelf third party components completing the offering.

FEATURES

Standard 90 x 90 mm 2X2MX platform
Modular structure enables wide compatibility and easy modification
One luminaire design can be used in different applications by changing the lens module
Integrated silicone gasket for ingress protection up to IP67
For super high power LEDs up to 7070 package sizes

TYPICAL APPLICATIONS

High bay lighting
Warehouses and other commercial, industrial and manufacturing structures

RELATED PRODUCTS

CS15767_HB-2X2MX-8-M <!–Kopioi tarvittaessa useampi linkki–!>

OLIVIA-M – LOW PROFILE WITH HIGH PERFORMANCE

OLIVIA-M is LEDiL’s latest addition to accompany the OLIVIA range of optics released earlier this year. The unique folded TIR design makes this compact lens outstandingly small in height, while maintaining superb luminous flux of medium size COB’s and offering great flexibility with solderless connectors. With a medium sized beam pattern OLIVIA-M is ideal for illuminating any indoor space from hallways to museums and cinemas. OLIVIA-M is compatible with a range of COB’s with LES sizes up to 19 mm and Zhaga compliant solderless connectors.

FEATURES

Unique folded TIR design allows really flat luminaire design
Compatible with a range of COB’s with LES size up to 19 mm
Typical FWHM 30° depending on the LES size
Compatible with Zhaga book 3 compliant solderless connectors from a range of manufacturers
Efficient dual-element design with low point glare

TYPICAL APPLICATIONS

Track lighting and downlights for shops and museums
Hallways and movie theathers

STRADA-2X2-SCL – YOUR OFF-THE-SHELF SOLUTION TO TACKLE EUROPEAN S-CLASS REQUIREMENTS

LEDiL introduces a new optic solution to the growing STRADA-2X2 family. STRADA-2X2-SCL is designed to give a very wide beam with the highest intensity peak reaching as far as 75 degrees. The lens is designed to maintain its wide beam even with the flat cover glass attached. STRADA-2X2-SCL can illuminate the roads with distance from pole to pole being up to 10 times the mounting height. With special attention given to minimize light spillage to the house side and modular design compatible with all other STRADA-2X2 optics STRADA-2X2-SCL is the perfect companion to meet the requirements of the European S-class.

FEATURES

Very wide beam pattern falling between IESNA Type II and Type III distributions
Designed for European S-class
Special attention has been given to minimize light spilling to the house side
Compatible with LEDs up to 5050 sized packages

TYPICAL APPLICATIONS

Street and parking lot lighting
Pedestrian lighting
General road lighting
Outdoor lighting

THE NEXT GENERATION OF ROSE-UV – PERFORMANCE AND DURABILITY IMPROVED

LEDiL releases a set of new silicone lenses targeted for UV applications. G2-ROSE-UV family is a full family of lenses designed for domed high power UV-LEDs gaining popularity in the market. With the addition of G2-ROSE-UV family to previously released G2-NIS033U family LEDiL is now offering a thorough solution to the market with a full set of lenses for both flat packaged and domed UV-LEDs. LEDiL’s second generation UV lenses are manufactured from special optical grade silicone capable of withstanding heavy exposures of UV radiation which makes these lenses suitable for modern NDT and curing applications. New optical grade silicones have been tested in heavy UV exposure over 6000 hours without noticeable change in the transmission.

FEATURES

UV optics for 3535 sized dome LEDs from LedEngin, Nichia and LG
Made of optical grade silicone with very good UV-withstanding

TYPICAL APPLICATIONS

Non-destructive testing
Curing applications
Anti-bacterial lighting

LEDiL’S NEW HB-IP-2X6-RS – REACHING FOR HIGHER HEIGHTS

LEDiL’s HB-IP-2X6 family expands with new beam version, HB-IP-2X6-RS. Being developed especially for high bay applications HB-IP-2X6-RS offers efficient LED lighting into industrial buildings and higher spaces. Integrated silicone gasket allows ingress protection up to IP67, and precision-molded optical grade PMMA provides long lifetime for both indoor and outdoor use. HB-IP-2X6-RS is optimized for high-power LEDs up to XM-L sized packages to bring out the most for your lighting needs.

FEATURES

Developed especially for high bay applications
Ingress protection up to IP67 with integrated silicone gasket
Optimized for high-power LEDs from leading manufacturers
Compatible with up to XM-L sized LED packages

TYPICAL APPLICATIONS

Warehouses
Commercial, industrial and manufacturing structures
Sports arenas and stadiums

LUCIA – PRECISION PACKED POWER

LUCIA is LEDiL’s latest addition to the range of very narrow spot optics. LUCIA is a large 4-up module with high quality Real Spot type TIR optics that can be used in many different professional lighting applications. First in the series to be released is LUCIA-S, providing a very narrow light beam with good cut-off. Specially tilted TIR design in a single array helps to achieve astonishing light control, and LEDiL’s patented RZ-surface makes sure the color-over-angle performance and beam uniformity are optimized.

FEATURES

Very narrow flood with a good cut-off
Special tilting technique and RZ surface for maximum beam uniformity
Designed for super high power multi-crystal LEDs up to 7070 package size
LUCIA-D to be released soon

TYPICAL APPLICATIONS

Outdoor up-/downlighting applications
Surgery light
Flood light
High-speed camera lighting
Architectural lighting

STRADA-SQ-T3B – FOR ROAD LIGHTING SITUATIONS NOT REQUIRING LIGHT ON THE HOUSE SIDE

STRADA-SQ-T3B is a special version of LEDiL’s SQ-T3 optic designed to block the backwards directed light. This house-side light is sometimes causing unwanted illumination and glare, especially in confined road areas found in city centers. LEDiL’s STRADA-SQ-T3B has IESNA Type III Medium beam pattern suitable for most of the road classes required in residential areas and city centers. Based on LEDiL’s SQ single lens platform, this optic is compatible with most of the super high power multi-crystal LEDs up to 7070 packages. Being a single lens, it offers unsurpassed versatility and ease of fitting into various different luminaire shapes and structures. Requiring only a minimum of 5 mm space between lenses, they can be stacked around relatively close to each other whithout having any noticable shading. As all LEDiL’s products, STRADA-SQ-T3B is optimized for high efficiency allowing customers to utilize the LEDs fully and maximize their lamp lumens.

FEATURES

Compatible with LEDs up to 7070 super high power multi-crystal packages
Minimized house side spill light
Typical IESNA classification: Type III Medium

TYPICAL APPLICATIONS

Street lighting on residential areas and elsewhere where house-side spill light has to be minimized

STRADA-2X2-PXL – SAFETY IN VISIBILITY

STRADA-2X2-PXL is left side traffic version of recently introduced STRADA-2X2-PX lens module. STRADA-2X2-PXL is designed for pedestrian crossing illumination in countries with left side traffic. Special attention has been given into designing an optic that gives even illumination over the crossing area while avoiding excessive glare to road. STRADA-2X2-PXL lens module is designed to provide also adequate illumination and contrast on a vertical plane, making it easier for drivers to notice crossing pedestrian over a longer distance.

FEATURES

Designed to meet official European pedestrian crossing requirements
Designed for left side traffic, separate version for right side traffic available
Highly uniform illumination on the crossing area
Light is directed along the traffic, reducing glare to drivers’ direction

TYPICAL APPLICATIONS

Pedestrian crossings

STRADA-2X2MX-VSM – MORE POWER WITH LESS COSTS

STRADA-2X2-MX-VSM is the latest addition to LEDiL’s 2X2MX family released earlier this year. Standardized module based footprint allows easy fitting, future-proof luminaire construction and mixing with other modules inside the same product family. Symmetrical and wide square-shaped beam makes it ideal choice for lighting wide outdoor areas such as parking lots and streets. STRADA-2X2MX-VSM is designed for multi-crystal super high power LEDs, packing enough power to achieve feasible low pole area light with just a single module.

FEATURES

Symmetrical wide square beam (IESNA Type V Short)
Good luminance uniformity
High efficiency (94% typ.) optical design
Typical luminaire classifying IESNA “Semi Cutoff” or G1-G2 luminous intensity class (EN13201)
For Super high-power LEDs up to 7070 packages

TYPICAL APPLICATIONS

Wide area lighting
Pedestrian areas
Parking lots
Street lighting

RELATED PRODUCTS

CS15763_STRADA-2X2MX-8-VSM

WINNIE-O – COMPACT AND COMFORTABLE

WINNIE-family expands with the WINNIE-O having oval shaped light distribution. WINNIE-O’s unique folded TIR design has substantially reduced lens height compared to traditional collimating optical designs. Hyper-reflective white PC holders and optical grade PMMA gives exceptional optical efficiency common to all LEDiL’s products. The WINNIE-O is easily adaptive to many earlier luminaire and retrofit designs with its convenient MR16 size.

FEATURES

1:3 oval ratio depending on LED
PMMA lens for a range of COB’s with LES size up to 21 mm
Hyper-reflective white PC holder and optical grade PMMA for high efficiency
Unique flat folded TIR design
Zhaga Book 3 compatible fastening – pre-drilled heatsink available from a range of manufacturers
Designed to work with the range of COBs having LES sizes within 6 to 21 mm range

TYPICAL APPLICATIONS

Track lighting luminaires
Retrofits
Downlights

STRADA-2X2-VSM – PROVEN SOLUTION FOR YOUR AREA LIGHTING NEEDS

STRADA-2X2-VSM is a complementary module to the STRADA-2X2 product family. Its wide square-shaped beam is ideal for many area lighting applications. The standardized STRADA-2X2 modular structure makes the luminaire manufacturing easier and more cost efficient. The STRADA-2X2-VSM is optimized for good luminance uniformity and cut-off without sacrificing efficiency. It works with the range of high-power LEDs up to the 5050 size packages.

FEATURES

Symmetrical wide square beam (IESNA Type V Short)
Good luminance uniformity
High efficiency optical design
Typical luminaire classifying IESNA “Semi Cutoff” or G1-G2 luminous intensity class (EN13201)

TYPICAL APPLICATIONS

Wide area lighting
Pedestrian areas
Parking lots
Street lighting

STRADA-2X2-CAT – ILLUMINATE YOUR FAVOURITE HANG-OUT WITH EXCELLENT UNIFORMITY

STRADA-2X2-CAT is especially designed for ME classes and wire suspended (catenary) street luminaires. It provides good illuminance and luminance uniformity with low glare and good cut-off. Standard 2X2 footprint provides modularity with good flexibility and future-proof solution for luminaire manufacturing. When rotated 90 degrees, it can be used to illuminate very wide boulevards with closer installation spacings.

FEATURES

Good illuminance and luminance uniformity
Low glare and excellent cutoff
Typical luminaire classifying IESNA “Full Cutoff” or G4-G6 luminous intensity class (EN13201)
Can be rotated 90 deg to illuminate very wide boulevards with luminaires installed closer to each other

TYPICAL APPLICATIONS

STRADA-2X2-TF – CONTROLLED TUNNEL LIGHTING WITH INCREASED PERCEPTION

LEDiL introduces a new member to the STRADA-2X2 module family, asymmetric STRADA-2X2-TF designed especially for tunnel lighting applications. It’s strongly directed counter beam obtains higher cd/m² efficacy with less lumen, and increases perception of the objects facing driver, by increasing negative contrast between street and vertical surfaces. STRADA-2X2-TF works with small high power LEDs, but also with some of the bigger LED’s with flat profile such as Luxeon Mz.

FEATURES

Designed for tunnel lighting applications with counter beam setup
Strong forward throwing characteristic for better cd/m2 efficacy with fewer lumens
Designed to have low TI[%] value on most setups
Light spill reduced on the back side for increased negative contrast between street surface and vertical surfaces

TYPICAL APPLICATIONS

STELLA-FRESNEL – HIGH BAY IS NOW HIGHER

LEDiL’s STELLA family of silicone molded optics grows with a STELLA-FRESNEL, 20-35 degree spot lens ideal for compact sized high bay and narrow flood applications where you need to have long throw. It shares the same footprint as the other members of STELLA family, making it easy to alter existing Stella-HB design to suit even higher installation heights. With its 89 % typical efficiency and excellent uniformity, STELLA-FRESNEL excels in the most demanding industrial lighting applications. The universal design works with a variety of COBs with LES size reaching from 6 to 30 mm in diameter. The STELLA-FRESNEL can also be used with Zhaga type solderless connectors from a range of manufacturers.

FEATURES

Typical FWHM 20-35 degrees subject to LES size
Protected from ingression up to IP67 rating
High efficiency (typ. 89 %) with excellent uniformity
Universal design works with a mid-sized COBs from a range of 6 to 30 mm in diameter
Very good thermal, UV and impact resistance

TYPICAL APPLICATIONS

Compact sized high bay applications
General lighting with narrow flood type beam

STRADA-SQ-ANZ – NEW SQ LENSES OPTIMIZED FOR AUSTRALIAN AND NEW ZEALAND’S ROADS

LEDiL’s new STRADA-SQ-ANZ optics are designed to meet Australian and New Zealand street lighting requirements. With two separate light distributions – one optimized for pedestrian (STRADA-SQ-ANZ-P) and another for vehicular road lighting classes (STRADA-SQ-ANZ-V), they offer unbeatable complementary solution. Both versions are recommended to be used with cylindrical or dome shaped protective glass. STRADA-SQ-ANZ optics are designed to provide uniform results with multi-crystal high power LEDs across a range of manufacturers.

FEATURES

Standard STRADA-SQ form factor, dimensions 25 x 25 mm, height 8.1 mm
Two separate light distributions: STRADA-SQ-ANZ-V for vehicular and STRADA-SQ-ANZ-P for pedestrian road lighting classes
Very wide light distribution allowing longer pole distances

TYPICAL APPLICATIONS

Street lighting meeting AS/NSZ V3 class requirements
Pedestrian lighting for P4 and P5 class roads

FLORENCE-1R-UP – FOR UPLIGHTING AND INDIRECT ILLUMINATION

The latest addition to the FLORENCE-1R family is the FLORENCE-1R-UP with a wide batwing type beam designed especially for uplighting and indirect illumination. The balanced wide batwing type beam throws indirect light back to the room and can be used as a standalone lighting solution or combined with downward direct lighting. FLORENCE-1R-UP can be combined with Z60 or Z90 to achieve any office lighting light distribution requirement and easily adjust the direct light output. Used with Z60 or Z90, modules combine efficient direct light for the workplace with indirect light for agreeable ceiling illumination. By lighting up the ceiling it’s possible to lower UGR without decreasing the amount of direct lighting. The FLORENCE-1R-UP mounts into aluminium profile with typical installation distance from 20 to 50 cm from the ceiling. The FLORENCE-1R-UP is designed for mid-power LED modules and it can also be used with smaller high power LED variants to achieve better color unifomity.

FEATURES

Used as a standalone lighting solution or combined with other luminaires in the room
Mounting into aluminium profile with typical installation distance from 20 to 50 cm from the ceiling

TYPICAL APPLICATIONS

VANESSA – POWER OF SIMPLICITY

LEDiL’s new VANESSA is a versatile and cost efficient linear module aimed at a range of applications in interior lighting. It has twelve efficient lenses in a row and is designed for high power leds from Cree, Philips Lumileds, Osram and LG. VANESSA enables easy design of very compact luminaires capable of output exceeding 1000 lumens. The module has excellent efficiency of over 90 %. Use of the modules also simplifies luminaire design reducing manufacturing costs.

FEATURES

12-up lens module for high power LEDs
Three beam types available: Spot, Wide and Oval
Optical efficiency over 90 %
Simple to install
PCB design and demo boards available on request
Proven LEDiL light quality

TYPICAL APPLICATIONS

Interior architectural lighting
Task lighting
Hospitality lighting

HB-2X2-O – ENERGY EFFICIENT WAREHOUSE LIGHTING

LEDiL introduces a new addition to its High Bay 2X2 module range. The new HB-2X2-O has been developed especially for illuminating warehouses with high shelves so that no light is wasted on the shelves. HB-2X2-O produces an oval beam pattern suitable for aisle lighting with enough sideways light to provide the necessary vertical illumination on the fronts of the shelves. HB-2X2-O is designed to work with a range of high power LEDs from Cree, Osram, Philips Lumileds and Nichia.

FEATURES

Developed especially for warehouse aisle lighting application, aisle width 3-4 meters.
Optimized for a range of high power LEDs, up to XM-L size.
HB-2X2-O features the versatile footprint compatible across the whole 2X2 module family.

TYPICAL APPLICATIONS

High bay lighting

LEDiL’S NEW HB-IP-2X6-W – EFFICIENT HIGH BAY LIGHTING

The new HB-IP-2X6-W module extends LEDiL’s proven ingress protected STRADA-IP module range into High Bay lighting. The module is based on the same versatile base used in STRADA-IP and can be incorporated into the same luminaire design. This opens new markets and opportunities for existing luminaires. Luminaire designs based on the standard IP-2X6 footprint can be adapted between street lighting and high bay by changing the optics only. IP-2X6 modules have an integrated silicone gasket and provide an IP-rating up to IP67.

FEATURES

Wide square shaped light distribution.
Developed especially for high bay applications.
Compatible with LEDs up to XM-L size
Optimised for high power LEDs from leading manufacturers, including Cree, Osram, Philips Lumileds and Nichia.
Meets DLC (DesignLights Consortium™) optical requirements for high bay fixtures.

TYPICAL APPLICATIONS

DLC COMPLIANT HIGH BAY LENSES FOR INDUSTRIAL & COMMERCIAL USERS

LEDiL Oy, a forerunner in the development of secondary LED optics introduces a new member to the HB family. The HB-SQ-A lens is optimized to create a square, symmetric light pattern which meets DLC (DesignLights Consortium™) high bay requirements with 70% lm in 0° – 60° zone and 35 % lm in 20° – 50° zone. This lens is optimized, for Philips Lumiled’s LUXEON® M.

FEATURES

Meets DLC (DesignLights Consortium™) optical requirements for high bay fixtures
Low glare. Additional glare shields or baffles may not be necessary
Using an off-the-shelf optical solution makes developing high bay fixtures faster and less costly
Flexible installation side-by-side or end-to-end
Integral mounting pins and automated assembly marking for rapid and reliable assembly
Screw holes allow secure fastening
IP-rated sealing system may be created by using potting or sealing compounds

TYPICAL APPLICATIONS

LISA2 LENSES PROVIDE THE FOCUS IN MARULALED’S COOLTUBE™ TECHNOLOGY

Control is what it’s all about with MarulaLED’s patent-pending* CoolTube™ technology. This innovative line of light engines, designed for integration into OEM partners’ luminaires, offers users the ability to control color temperature and beam angle by adjusting the current supplied to specific LEDs. Control of heat, however, is what makes the design truly “cool”. CoolTube™ technology allows the end user to safely position the luminaire to the most useable position, while eliminating bulky heat sinks and metal-clad PCBs. This makes the product ideal for use in restaurants, hotels, workstations, recreational vehicles; in fact, wherever safe contact with the luminaire can be imagined. Beam control in MarulaLED’s Low Bay Module is optimized by balancing current flow to LEDs mated with LEDiL’s LISA2-M (medium) and LISA2-WW (very wide) secondary optics. MarulaLED’s LE32 module, on the other hand, promotes control of color temperature by the adjustment of power to half of the LEDs. The sixteen inner LEDs used in the LE32 module are a warmer color temperature than the remaining LEDs. This module uses 32 of LEDiL’s LISA2-M medium beam TIR lens. The LISA2 series of lenses, measuring less than 10 mm in diameter and less than 7 mm tall, achieves over 90 % light transmission efficiency through superior design and superior material. The TIR lens is engineered to exacting tolerances and molded from high-quality acrylic (PMMA), which offers outstanding transmission efficiency and is virtually impervious to UV radiation. Each lens is mounted in a molded polycarbonate (PC) housing designed for alignment to a specific LED, providing precise location of the lens at the ideal focal point for each qualified brand or style of LED. While the lens housing is rated for use at 115 ⁰C, the cool operation of the light engine means that the housing, which attaches to the PCB by means of locating pins or optional mounting clips, will undoubtedly maintain its physical integrity over the usable life of the luminaire. *International Patent Cooperation Treaty (PCT) Receiving Office (application PCT/IB2012/050693).

RELATED PRODUCTS

FP10995_LISA2-M-PIN FP10997_LISA2-WW-PIN

LISA2-R – 9.9 MM DIAMETER REFLECTOR OPTIMIZED FOR A WIDE RANGE OF LIGHTING CLASS LEDS

LEDiL announces the release of the new LISA2-R-PIN reflector, measuring just 9.9 mm diameter and 6.5 mm tall. This tiny reflector differs from other reflectors presently available by providing an even, homogeneous and aesthetically pleasing beam with a diffuse cut-off. The new LISA2-R supports a wide variety of single-die LEDs offered by the leading LED vendors, including Cree, Philips Lumileds, Osram, Nichia, Seoul and Sharp. LISA2-R produces a beam angle of 78⁰ to 86⁰ FWHM (depending on LED used) without the shadow and hot spots created by LEDs used without secondary optics. Almost 90 % light intensity is available at 66⁰ full beam width. The small size permits dense population of LEDs for maximum light output in a space-constrained area. The nearly square-wave beam angle produced by LISA2-R is ideal for general lighting of smaller spaces with minimum glare or hot-spots, or for casting a gentle-glow of energy efficient LED light in small display cabinets or for interior mood or effect lighting. The small size and inherent cool-to-the-touch benefit of LED technology facilitates the design of low-profile fixtures used in residential under-cabinet applications, in cove lighting, or to light storage compartments in emergency vehicles. The impact-resistant polycarbonate used to manufacture the reflector is of a special, highly-reflective grade that does not require metallization to achieve peak performance of up to 92 % efficiency. The housing contains integrally molded location pins for precise location over the LED and the location pins can also be fastened to the PCB with an approved secondary adhesive. The material is RoHS compliant, rated for use up to 115 ⁰C and meets UL 94 V-2 flammability rating.

RELATED PRODUCTS

C12469_LISA2-R-PIN

JULIA LENS IDEAL FOR BACKLIGHTING

LEDiL announces the addition of JULIA-A lenses to its already expansive range of precision-engineered optics. JULIA-A is a rotationally symmetrical lens that produces batwing light emission pattern, which allows LEDs such as Cree’s XP Series or Philips Lumileds’ Rebel and Rebel-ES Series, to achieve over 90 % uniformity on display surfaces 50-100 mm from the PCB. Since these and other similar LEDs are inherently point-sources of light, JULIA-A lenses enable the LEDs to be used in a wide-variety of backlighting applications. Typical applications include backlight roadway signage and channel letters, architectural effect lighting, under-cabinet and cove lighting, as well as museum and display lights. Other enabled applications include 360⁰ warning beacons, backlighting of emergency lights and exit signs, and interior mood lighting on vehicles such as buses, rail coach cars and commercial aircraft. JULIA-A achieves light distribution with greater than 90 % uniformity when directed to a parallel surface located between 50 mm and 100 mm from the PCB. Recommended LED spacing is 100 mm. The lens is less than 19 mm in diameter and only 4.66 mm tall (4.81 mm with optional tape). Precise mounting is ensured by the addition of two 0.63 mm mounting pins and the product is available with optional automotive-grade polyurethane foam mounting tape for easy and reliable installation. LEDiL molds JULIA-A from optical-grade, UV-stabilized PMMA plastic.

RELATED PRODUCTS

F11947_JULIA-A FA11948_JULIA-A

RITA-A – ASYMMETRIC REFLECTOR FAMILY CONCENTRATES LIGHT PRECISELY WHERE NEEDED

LEDiL announces its latest product addition, the RITA-A reflector family, incorporating a unique optical design that further extends LEDiL’s asymmetric secondary optic expertise for lighting class LEDs. Currently qualified LEDs include Cree’s XLamp® LEDs and Philips Lumileds LUXEON® Rebel and LUXEON® M LEDs. The offset design of this 17.1 mm tall reflector (17.3 mm height with optional pre-installed mounting tape) neatly projects a rectangular beam of energy-efficient LED light with peak intensity in a forward offset 80⁰ from the solid-state light source. The 28.4 mm x 36 mm reflector cup is mounted to a 22 mm base. LEDiL’s designers envision indoor use of RITA-A mounted to provide task and application lighting, as well as hallway or accent lighting. Lighting of conference room tables and workspaces is also possible with RITA-A. Works of art or museum pieces are easily illuminated without the need to tilt the lamp body and the reflector is easily rotated to provide extra accent where needed. RITA-A can be mounted side-by-side to evenly illuminate long walls with minimal hot-spots or shadowing. Outdoor applications include residential lamps used in urban areas or for lighting stairwells in parking garages. Reflectors, by nature, are more lightweight than similarly-sized TIR lenses and, since RITA-A is molded in impact resistant polycarbonate, the product is rated for use up to 115 ⁰C and meets UL 94 V-2 flammability rating. RITA-A does not require metallization to achieve high light transmission efficiency and the design enhances thermal flow within the fixture to help regulate thermal efficiency of the lighting system. The adapter base contains integrally molded location pins that locate RITA-A precisely over the LED. Attachment is achieved through the use of an approved secondary adhesive, or with optionally installed mounting tape.

RELATED PRODUCTS

C12512_RITA-A CA12514_RITA-A

STELLA – SILICONE MOLDED STREET LIGHT OPTIC

When we started to design the STELLA lens for street lighting, we wanted to give our customers the full benefits of cost-effective COBs without surrendering our principles of comfortable and functional lighting. To meet our design goals we looked into new materials and discovered optical grade silicone. New innovations in production technology allow us to manage light with almost surgical precision. Superior thermal properties and self-sealability make this lens the ideal choice for a range of lighting applications.

FEATURES

Self-sealing design simplifies luminaire design
Very good thermal and UV resistance
Type II / Type III light distribution depending on a LES size
Precise light control and good cut-off
Excellent efficiency

TYPICAL APPLICATIONS

Street lighting
Area lighting
Walkway lighting

RELATED PRODUCTS

FN13323_STELLA-A FN14253_STELLA-A

BILLIE – THE BRIGHT ANSWER FOR BILLBOARD LIGHTING

BILLIE, a rectangular wall-washing optic with excellent beam uniformity; another unique innovation made possible by LEDiL. Especially designed for indoor and outdoor architectural and billboard lighting, BILLIE is the perfect solution for small concealed fixtures. The asymmetrically tilted beam ensures uniform illumination on vertical surfaces. BILLIE is compatible with a variety of lighting class LEDs manufactured by Cree, Osram, Nichia or Philips Lumileds.

FEATURES

Outer diameter 21.6 mm compliant with other LEDiL products
Excellent efficiency, fewer LEDs needed
Distance-height ratio of 1:3, distance-width ratio of 1:2
Precision molded lens made from optical grade PMMA
Durable polycarbonate holder
Easy and accurate mounting using positioning pins

TYPICAL APPLICATIONS

Billboard lighting
Wall-washing
Retail lighting
Museums

STRADA-SQ-T-DWC FOR STREET LIGHTING

LEDiL Oy, a global leader in the development of secondary LED optics, introduces its newest STRADA family member, the STRADA-SQ-T-DWC lens. This lens is designed to create a broad, rectangularlight pattern with an asymmetric (tilted) beam that maximizes usable light in the target area and minimizes stray light. STRADA-SQ-T-DWC allows roadway lighting designers to rapidly develop luminaires for IESNA Type III Medium distribution or European ME road use. Optimized for usewith Philips Lumileds LUXEON® M LED, consult ledil.com for other qualified LEDs.

FEATURES

For use in street lighting arrangements requiring pole height/distance ratio (ME4A width 1:4.5)
Wide beam with candela peak at 70° with outstanding cut-off to minimize glare
Excellent luminance and illuminance performance and uniformity over the covered area
Designed for IESNA RP-8-00 and CIE 140/EN 13201 street light requirements, suitable for other common arrangements
IESNA: Type III medium, BUG rating; B2-UX-G2

TYPICAL APPLICATIONS

PETUNIA LENS FOR PLANT LIGHTING

LEDiL Oy, a forerunner in the development in secondary LED optics, introduces the new PETUNIA lens array designed specifically for plant lighting fixtures. The current medium beam is ideal for use in fixtures mounted a few meters above plant growth beds. The low-profile and densely-spaced PETUNIA array offers the ability to design a compact fixture for use in crowded greenhouses. One of the biggest advantages of using PETUNIA lenses and OSRAM OSLON® LEDs is the tremendous reduction in energy cost and the ability to deliver growing plants the light spectrum needed throughout their growth cycle.

FEATURES

Densely-spaced 12 lens array
Compact 3×4 pattern
Medium beam angle
High light transmission efficiency
Virtually impervious to damage by UV radiation
High scratch and abrasion resistance
RoHS compliant and halogen-free

TYPICAL APPLICATIONS

SAGA SILICONE HYBRID OPTIC

Bathrooms, warehouses and factories are challenging environments for lighting. Luminaires need to withstand the heat and moisture without failing. At the same time they need to provide an adequate amount of good quality light. The ingenious design of LEDiL’s new SAGA answers to this call for a sealed optic which can withstand heat and moisture. Besides being rugged, we made it pretty. The Hyper-reflecting frame catches light spill from the silicone TIR-lens and recycles it to reduce point contrast and glare.

FEATURES

Innovative hybrid design
Zhaga inspired fastening and 50 mm outer diameter
Typical FWHM 50-70° depending on LES size
Typical efficiency 93 %

TYPICAL APPLICATIONS

Low bay lighting
Interior architectural lighting
Industrial lighting
Hospitality lighting

HELENA — SHINING BRIGHT LIKE A DIAMOND

The New Fresnel lens from Ledil – HELENA – is an excellent example of our precision engineering. The tool has been engineered to exacting standards using Diamond turning methods. This production method produces some of the highest quality optics in the world and allows Ledil to manufacture to an accuracy of a hundredth of a millimetre, thus giving great control of the light – turning light into lighting the LEDiL way. Helena is designed to work with Luxeon K series LEDs and it produces 22˚ beam angle. The Helena has been designed to sit very close to light source this allowing compact fixture design. There are 2 variants – the HELENA-A is designed for a maximum intensity peak, giving good on axis candela values. HELENA-B is manufactured with some pillow texturing on the top side of the lense to widen and smooth the light fractionally.

FEATURES

Precise diamond turned moulded surfaces replicate designed optical shape with exact precision
Narrow viewing angle with good efficiency
Fresnel type folded prism optical design allows flat design of the fixture

TYPICAL APPLICATIONS

Indoor architectural lighting
Stage lighting
Retail lighting
Flat luminaire designs
Applications where maximum intensity of the light source is critical

LEDiL’S NEW EMERALD — PERFORMS WHEN YOU NEED IT THE MOST

Cost effective and new one-optic solution for emergency exit route lights. Exit routes need to be efficiently lit in order to evacuate buildings safely. Escape route lighting fixtures are often powered with built-in batteries in case of power supply failures. This sets high demands for the power consumption and efficiency of the fixture. LEDiL’s new EMERALD optic answers just these demands. It is designed to be a one-LED, one-optic solution for exit route lighting. With EMERALD’s extremely wide beam distribution it’s possible to achieve EN 1838 compliant lighting for installation height to distance ratios up to and beyond 1:7. Extended illumination range and single LED design reduces costs of the fixture and installation significantly.

FEATURES

Designed for lighting of the emergency exit routes according EN 1838 Emergency lighting standard
Standard compliant with installation height to distance ratios up to and beyond 1:7
Extremely wide beam distribution with tight cut off in vertical direction
Lighting fixtures can be made very small and unnoticeable
Compatible with various lighting class LEDs manufactured by Cree, Osram, Nichia or Philips Lumileds.

TYPICAL APPLICATIONS

Escape route lighting

STRADA-T-6X1-DWC — NOW OPTIMIZED FOR OSLON SQUARE

LEDiL, the primary choice for secondary optics, introduces the new STRADA-T-6X1-DWC lens array optimized specifically for Osram’s OSLON Square LUW CQAR (Streetwhite) LEDs. Emitted light has an asymmetric tilt in the wide beam to efficiently direct light to the roadway surface and to minimize stray light outside of target areas. Its light distribution is ideal for the development of IESNA Type III Medium or European ME3A compliant luminaires for street lighting arrangements requiring up to and beyond 1:4.5 pole height/pole distance ratio.

FEATURES

Very wide asymmetrical beam with 70° candela peak
Great luminance/illuminance performance and uniformity
Outstanding cutoff to minimize glare
Low-profile and side-to-side or end-to-end stackable
Six lenses in one array – reduced installation cost versus single lenses
Location pins and screw holes for precise mounting
Shape resists excessive build-up of dust and dirt
IP-rated sealing system may be created by using potting or sealing compounds
High light transmission efficiency and virtually impervious to UV damage
High scratch and abrasion resistance
RoHS compliant and halogen-free

TYPICAL APPLICATIONS

RELATED PRODUCTS

C13140_STRADA-T-6X1-DWC

VIRPI – PRECISELY PACKED POWER

Are you in need of high output pure lighting power? Then get LEDiL’s new VIRPI family of optics. High power LEDs arrayed in a 5 by 5 cluster delivering more lumen output in a smaller package – perfect for retail lighting and other applications where high luminance levels are needed.

FEATURES

Dense array of 25 LEDs
Small footprint, high light output
Three viewing angles – spot, medium and wide

TYPICAL APPLICATIONS

Retail lighting and other applications where high luminous flux is desired
Track lighting fixtures

RELATED PRODUCTS

C12607_VIRPI-S C12608_VIRPI-M C12609_VIRPI-W

LEDiL INTRODUCES NEW MEMBERS TO THE FLARE FAMILY

LEDiL’s unique FLARE family of Free-Form lenses has been extended with diffused versions of FLARE-MINI and FLARE-MAXI. These versatile lenses provide the same wide horizontal beam as other FLARE lenses, with a vertical cutoff that is not as tight. The beam pattern is suitable for high bay warehouse lighting and replacement of linear fluorescent light fixtures used in aisle lighting.

FEATURES

Very wide horizontal beam with medium vertical cutoff
Designed for LEDs from Cree, Nichia, Seoul, Osram and Philips Lumileds
Molded from PMMA – no degradation due to UV radiation
RoHS compliant and halogen free

TYPICAL APPLICATIONS

Corridor & Wall-Washing applications
Emergency beacons and vehicle warning lights
Cove lighting
Wall sconces and architectural applications

RELATED PRODUCTS

C13015_FLARE-MINI-AD CA13057_FLARE-MINI-AD C13012_FLARE-MAXI-D

LENA-WAS – TO BOLDLY LIGHT AS NEVER BEFORE

LEDiL, a global leader in the development of secondary LED optics, introduces a new member to the LENA family of reflectors. LENA-WAS is an asymmetric version optimized for wall-washing lighting. The asymmetric reflector twist-and-lock to the same mounting bases common to other LENA and LENINA reflectors. This new asymmetric reflector is qualified for use with many of the popular COB LEDs on the market.

FEATURES

Asymmetric light distribution pattern allows flush mount of fixture without tilting it
Easy twist-and-lock latching mechanism
Common mounting base with other LENA and LENINA products
Polycarbonate reflector with metallized, laquered finish. Optional diffusing sub-lens available
Outer diameter 111 mm
Dedicated base parts available for various LEDs

TYPICAL APPLICATIONS

Wall-washing applications where good optical efficiency and precise light distribution are important
Architectural lighting
Retail lighting
Replacement of common metal-halide or halogen wall-washers

RELATED PRODUCTS

C12948_LENA-WAS

RITA-WAS – LIGHT UP YOUR WALLS WITH PRECISE LIGHT

Another unique wall washing reflector from LEDiL – RITA-WAS is the sister of LEDiL’s famous RITA-A. Asymmetric beam is tilted to maximize light output in wall washing and architectural applications. RITA-WAS is made of Hyper Reflective white PC that gives a pleasant and soft light distribution with good efficiency.

FEATURES

Optimized Asymmetric Light Distribution designed especially for Wall-Washing & Architectural applications
Don’t waste those precious lumens! Get more light on the wall compared to traditional wall-washing solutions
Made of Hyper-Reflective material – RITA-WAS does not require metallization to achieve high light transmission efficiency
The adapter base contains integrally molded location pins to locate RITA-WAS precisely over the LED. Attachment is achieved through the use of an approved secondary adhesive, or optionally with installed mounting tape

TYPICAL APPLICATIONS

Architectural lighting
Wall washing
Outdoors facade accent lighting

NEW STRADA-IP-2X6-DWC, PERFORMANCE MEETS FUNCTIONALITY

LEDiL’s newest STRADA street lighting optic is designed for peak optical performance, ease of installation and protection from dirt and water. STRADA-IP-2X6-DWC is a precision-engineered 12-position lens array with a tilted beam to direct light efficiently to the roadway surface. The integral silicone gasket protects up to IP67. The wide, asymmetric beam allows for rapid development of luminaires classified as IESNA Type II and III and related European and Russian street lighting classes.

FEATURES

Very wide asymmetrical beam with 70˚ candela peak
Great light uniformity, even with long pole distances
Outstanding cutoff to minimize glare
12 optical elements with individually optimized light distribution, reduced installation cost
Easy positioning on PCB with locating pins
Mounting direction marked in the module
Silicone moulded gasket for sealing of the module
Carefully tested for IP67 protection
RoHS compliant
Space reserved for connectors and PCB fastening screws
Module’s shape and surfaces are designed for easy cleaning
No need for external light cover, get up to 20 % more lumen output in your application
IP-rated semi-custom modules possible with various optics from STRADA family
High light transmission efficiency and virtually impervious to UV-damage
High scratch and abrasion resistance
Ideal solution for street lighting arrangements requiring pole height / distance ratio of up to and beyond 1:6

TYPICAL APPLICATIONS

SPOT OR WIDE? TAKE BOTH WITH NEW ZOWIE-MINI

Small in size but large in features, ZOWIE-MINI is designed to perform in challenging applications. It provides good efficiency over a wide range of beam angles. ZOWIE-MINI is precisely engineered and manufactured as the world’s first zoomable secondary optical system with wide zoom range and evenly controlled light distribution without halos, black spots or fringes.

FEATURES

World’s first secondary optic offering good efficiency over the 3x zoom range without halos, black spots or fringes
FHWM angle range from 20° to 60° depending on LED chosen
Versatility in a wide range of applications, including museum lighting, retail displays, vehicles and showcases
Suitable for multi-lens arrays
Optical efficiency over 80 %
Compatibility tested with Cree, Osram, Nichia and Philips LEDs

TYPICAL APPLICATIONS

Museum lighting
Retail display
Vehicle lighting
Showcases

STRADA-SQ-VSM FOR WIDE-AREA LIGHTING

LEDiL Oy, a global leader in the development of secondary LED optics, introduces a new member of the STRADA family of street and area lighting optics – STRADA-SQ-VSM. This new product is designed and qualified for use with Philips Lumileds LUXEON® M, as well as Cree XLamp® XT-E and XM-L LEDs. It produces a square, uniform and extremely wide beam (150° FWHM) with good light cut-off to minimize glare. The product is ideal for development of parking lot luminaires, recreational and park lighting up to 1:7 mounting height to width ratio.

FEATURES

Sleek, low-profile design supports both retrofit and new designs
Flexible installation side-by-side or end-to-end
Screw holes allow secure fastening
Low glare; additional glare shields or baffles may not be necessary
Shape resists excessive build-up of dust and dirt
High light transmission efficiency (>90 %)
Virtually impervious to long-term UV damage
High scratch and abrasion resistance
IP-rated sealing system may be created by using potting or sealing compounds
RoHS compliant and halogen-free

TYPICAL APPLICATIONS

RELATED PRODUCTS

C12727_STRADA-SQ-VSM CA12891_STRADA-SQ-VSM

STRADA-T-6X1-DWC FOR STREET-LIGHTING

LEDiL Oy, the primary choice for secondary optics, introduces the new STRADA-T-6X1-DWC precision-engineered lens array. Emitted light has an asymmetric tilt in the wide beam to efficiently direct light to the roadway surface and to minimize stray light outside of target areas. This is ideal for the development of luminaires classified as IESNA Type III Medium (semi-cutoff) distribution and for street lighting arrangements requiring up to and beyond 1:6 pole height/pole distance ratio (ME4A 1:5 ratio).

FEATURES

Very wide asymmetrical beam with 70° candela peak
Great luminance/illuminance performance and uniformity, even with long pole distances
Outstanding cutoff to minimize glare
Low-profile and side-to-side| end-to-end stackable
Six lenses in one array – reduced installation cost over single lenses
Location pins and screw holes for precise mounting
IP-rated sealing system may be created by using potting or sealing compounds
High light transmission efficiency and virtually impervious to UV damage
High scratch and abrasion resistance
RoHS compliant and halogen-free

TYPICAL APPLICATIONS

RELATED PRODUCTS

C12449_STRADA-T-6X1-DWC C13140_STRADA-T-6X1-DWC

FLORENCE-3R ACCESSORIES – MANAGE YOUR LIGHTING AND SIMPLIFY YOUR ASSEMBLY

Manage your lighting and simplify your assembly with LEDiL’s new FLORENCE-3R accessories. LEDiL introduces additional fastening option for FLORENCE-3R series FLORENCE-PF-3R and two FLORENCE-shades to obtain lower UGR. Optional FLORENCE-shades are available in two colors, black and grey and they snap easily into place. The Unified Glare Rating below 19 is achievable with the additional shades. FLORENCE-PF-3R is designed for electrical appliances where accessing and opening of the product needs to be restricted. FLORENCE-PF-3R features tamper proof luminaire assembly and class 1 light fitting.

RELATED PRODUCTS

C14437_FLORENCE-PF-3R C14453_FLORENCE-3R-SHD-GR C14592_FLORENCE-3R-SHD-BLK

STRADA-2X2-ME-WIDE OPTICS – FOR WIDER ROADS AND TALLER POLES

LEDiL introduces two new STRADA-2X2 street lighting optics -ME-WIDE1 and -ME-WIDE2 designed for European and Asian roads requiring good luminance performance. ME-WIDE optics are especially designed for wider roads and taller poles than regular ME optics. STRADA-2X2-ME-WIDE1 version is for one sided roads whereas -WIDE2 is for two sided roads, either by opposing each other or for staggered pole setups. Asymmetric design removes the need of tilting the luminaire head. STRADA-2X2-WIDE1 light distribution design allows also illumination of the pedestrian walkways under the pole.

FEATURES

Design based on STRADA-2X2-ME, designed especially for wider roads and higher poles
STRADA-2X2-ME-WIDE1 light distribution design allows also illumination of pedestrian walkways under the pole
STRADA-2X2-ME-WIDE2 designed especially for staggered pole setups
Asymmetric design removes the need of tilting the luminaire head

TYPICAL APPLICATIONS

Street lighting

LEDiL’S NEW HB-IP-2X6-O – FOR EFFICIENT WAREHOUSE AISLE LIGHTING

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

FLARE-MAXI-T – LOW POLE STREET LIGHTING

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

LEILA-WAS – LET YOUR WALLS SHINE

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

FLORENCE-Z30 – REACHING INTO NEW HEIGHTS

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

STRADA-2X2-T1 – REACHING FURTHER

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

STELLA-DWC2 – WIDER ANGLES, IMPROVED PERFORMANCE

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

LEDiL’S G2-ROSE-UV OPTICS – HIGHLY DURABLE AND VERSATILE

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

STRADA-2X2-T4-B – WIDE, BRIGHT AND LEAVING SHADOWS BEHIND

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

HB-2X2MX-M – THE NEW INDUSTRY STANDARD FAMILY KEEPS GROWING

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

OLIVIA-M – LOW PROFILE WITH HIGH PERFORMANCE

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

Download release PDF

STRADA-2X2-SCL – YOUR OFF-THE-SHELF SOLUTION TO TACKLE EUROPEAN S-CLASS REQUIREMENTS

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

THE NEXT GENERATION OF ROSE-UV – PERFORMANCE AND DURABILITY IMPROVED

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

LEDiL’S NEW HB-IP-2X6-RS – REACHING FOR HIGHER HEIGHTS

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

LUCIA – PRECISION PACKED POWER

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

STRADA-SQ-T3B – FOR ROAD LIGHTING SITUATIONS NOT REQUIRING LIGHT ON THE HOUSE SIDE

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

STRADA-2X2-PXL – SAFETY IN VISIBILITY

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

STRADA-2X2MX-VSM – MORE POWER WITH LESS COSTS

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

WINNIE-O – COMPACT AND COMFORTABLE

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

STRADA-2X2-VSM – PROVEN SOLUTION FOR YOUR AREA LIGHTING NEEDS

FEATURES

TYPICAL APPLICATIONS

RELATED PRODUCTS

STRADA-2X2-CAT – ILLUMINATE YOUR FAVOURITE HANG-OUT WITH EXCELLENT UNIFORMITY

FEATURES

TYPICAL APPLICATIONS