STRADA-SQ FAMILY GROWS WITH THREE NEW BEAM VARIANTS

LEDiL’s STRADA-SQ optics with 25 x 25 mm footprint allows compact and versatile light engines, as well as the possibility to mix different beams inside one luminaire. Compatibility with the latest Super High Power LEDs ensures you get a strong lumen output from a relatively small area.

STRADA-SQ-C

Canopy, emergency lighting (anti panic), batwing light distribution

STRADA-SQ-PX

For pedestrian crossings with right side traffic

STRADA-SQ-SCL

Type II/III (Long) for very wide pole to pole distances

RELATED PRODUCTS

CA16031_STRADA-SQ-C C16029_STRADA-SQ-C CA16015_STRADA-SQ-SCL C16014_STRADA-SQ-SCL CA16169_STRADA-SQ-PX C16168_STRADA-SQ-PX

STRADA-2X2-FS3 – FOR TUNNEL AND AREA LIGHTING

FEATURES

Optimized for European tunnels with a counter-traffic installation
Throws light extremely far forward with the peak being in 60˚
Works well also in high mast area lighting on a very long pole distances or greater overlapping

TYPICAL APPLICATIONS

RELATED PRODUCTS

C15962_STRADA-2X2-FS3

LINNEA-ZT25 AND Z2T25 – SINGLE AND DOUBLE ASYMMETRICAL BEAM VERSIONS

FEATURES

Off-the-shelf linear optics fitting into old and new luminaire designs with wide PCB compatibility
Advanced optical control with great colour uniformity and reduced longitudinal glare
Extremely fast to assemble with integrated clips and optional end caps
Range of symmetrical and asymmetrical beams

TYPICAL APPLICATIONS

RELATED PRODUCTS

F15861_LINNEA-ZT25 F15860_LINNEA-Z2T25

STRADA-2X2CSP – 50 x 50 MM OPTICS IN THE INDUSTRY STANDARD 2X2 FOOTPRINT NOW OPTIMIZED FOR HIGH POWER CSP LEDS

STRADA-2X2CSP optics with a standardized 50 x 50 mm modular footprint are easily adaptable to different luminaire designs and applications. Being the original inventor of 2X2 modules LEDiL provides the widest range of different beams available – especially for street and high bay lighting. Modules are future proof, easy to install with one screw in the middle and are normally used with a protective cover in street lighting.

FEATURES

Range of lenses for the low cost but high power CSP LEDs (chip scale package) : STRADA-2X2CSP- SCL, -VSM, -T2 optimized for HP CSPs
Same footprint as in LEDiL standard STRADA-2X2
Existing HB versions of STRADA-2X2 are compatible with CSP LEDs as such

TYPICAL APPLICATIONS

RELATED PRODUCTS

C16119_STRADA-2X2CSP-SCL C15932_STRADA-2X2CSP-VSM C15967_STRADA-2X2CSP-T2

HB-2X2-ON – NARROW AND OVAL SHAPED BEAM IDEAL FOR AISLE AND SHELF LIGHTING IN INDUSTRIAL APPLICATIONS

FEATURES

About 50 % narrower beam along the aisle than with HB-2X2-O
Sharp cutoff in longitudinal direction for reduced glare

TYPICAL APPLICATIONS

Industrial and warehouse lighting
High bay applications

RELATED PRODUCTS

C15925_HB-2X2-ON

STRADA-2X2-T2-C – TYPE II (MEDIUM) STREET LIGHTING FOR TILTED AND LONG ARMATURES

FEATURES

Highly efficient PMMA optics and easy fastening
Designed for poles with an overhang or a bigger boom angle
Controlled amount of intentional backlight with no disturbing peak
Outstanding efficiency and full cutoff with flat glass
Fully compatible for Brazilian tenders

TYPICAL APPLICATIONS

Street lighting
Backlight illuminates pedestrian roads in addition to main roads

RELATED PRODUCTS

C15292_STRADA-2X2-T2-C

STRADA-IP-2X6-DWC-B – ORIGINAL -DWC NOW WITH SAME MECHANICAL FEATURES AS THE REST OF THE STRADA-IP-2X6 FAMILY

FEATURES

Updated mechanics including screw holes and component pockets
Silicone sealed wide asymmetric street light array with up to IP67 ingress protection
Ideal installation ratio 1:1 to road width and mounting height

TYPICAL APPLICATIONS

Universal street lighting
European M/ME classes
IESNA Type III (cutoff/full cutoff)

NEW ADDITIONS TO STRADELLA FAMILY – STRADELLA-T4-B AND STRADELLA-8-T1-A

STRADELLA-T4-B

Forward-throw beam with powerful peak at 70 degrees

FEATURES

Wide square-shaped beam pattern, wider than T4 optics
Minimal light spill on the house side

TYPICAL APPLICATIONS

STRADELLA-8-T1-A

Asymmetrical IESNA Type I beam with great cutoff

FEATURES

Designed for use with 5-15˚ boom angle (Type II)
Ideal for Indian street lighting requirements

TYPICAL APPLICATIONS

Road lighting
Tilted poles
India specific

RELATED PRODUCTS

C15917_STRADELLA-T4-B C16005_STRADELLA-8-T1-A

STRADA-IP-2X6-T2-B-90 & T3-B-90 – IESNA TYPE II AND III STREET LIGHT OPTICS WITH 90° ROTATED BEAMS

FEATURES

LEDiL standard 2X6 footprint with integrated silicone seal
Wide square-shaped beam pattern turned 90-degrees
Up to IP67 and designed to be used without protective glass
Fastening with 8 screws
Space reserved inside for PCB screws, connectors, wires and other components
Available in PMMA
Dimensions: 173 x71,4 mm

TYPICAL APPLICATIONS

RELATED PRODUCTS

CS15886_STRADA-IP-2X6-T2-B-90 CS15887_STRADA-IP-2X6-T3-B-90

STRADA-2X2S-T3 – LEDiL STANDARD 50×50 MM PLATFORM NOW IN SILICONE FOR HIGH TEMPERATURE APPLICATIONS WITH UNIVERSAL IESNA TYPE III BEAM

The STRADA-2X2S is made from silicone to withstand extremely high temperatures and applications requiring high lumen outputs. The standardized 50×50 mm modular footprint and one screw fastening provides the flexibility to use the same luminaire design with silicone lenses as well.

FEATURES

Standard 50×50 mm 2X2S platform
Manufactured from optical grade silicone
Black installation frame with one screw fastening
Suitable for LEDs with high Tj
Recommended to be used with a protective glass

TYPICAL APPLICATIONS

Street lighting
Outdoor area lighting
Pavement lighting
Applications that require high lumen output or have high temperatures

RELATED PRODUCTS

FN15180_STRADA-2X2S-T3 <!–Kopioi tarvittaessa useampi linkki–!>

LINNEA-O – OVAL SHAPED LIGHT DISTRIBUTION IDEAL FOR SHELF AND AISLE LIGHTING

FEATURES

Off-the-shelf linear optics fitting into old and new luminaire designs with wide PCB compatibility
Advanced optical control with great colour uniformity and reduced longitudinal glare
Extremely fast to assemble with integrated clips and optional end caps

TYPICAL APPLICATIONS

RELATED PRODUCTS

F15756_LINNEA-O F15952_LINNEA-O-B

STRADA-2X2MX-T2-S – STREET LIGHTING FOR HIGH OR DENSE POLE SETUPS

Standardized 2X2MX module family for Super high-power LEDs expands with a new T2-S version. STRADA-2X2MX-T2-S has a typical IESNA Type II Short light distribution and is a perfect building block for high or dense pole setups. Providing high quality lighting with an excellent cutoff, glare control and no backward spilling which are suggested for higher road lighting requirements (f.ex. ME1) such as freeways and main roads. STRADA-2X2MX-T2-S module comes with an integrated silicone gasket for IP67-ready luminaires.

FEATURES

Standard 90 x 90 mm 2X2MX footprint
IESNA Type II Short beam for high or dense pole setups
Suitable for European ME roads
Optimized LED spacing for excellent performance and thermal design
Great cutoff and minimized light spilling

TYPICAL APPLICATIONS

Highways and main roads (high poles or dense spacing)
High mast
Parking lots
Front row car promotion

RELATED PRODUCTS

CS15769_STRADA-2X2MX-8-T2-S

STRADA-IP-2X6-SCL – TYPE II/III (LONG) FOR VERY WIDE POLE TO POLE DISTANCES

LEDiL´s 2X6 optics are the modules behind the most efficient and long-lasting street lights. The STRADA-IP-2X6-SCL is targeted for the European S-class lighting with longitudinal beam falling between the IESNA classes Type II/III medium or long. With the special attention given to minimize light spilling to the house side and carefully directed beam, it has an reach that allows pole distances to be up to ten times the mounting height. STRADA-IP-2X6-SCL is IP67 protected with an integrated silicone gasket and optimized for the latest range of 5050 size LED packages.

FEATURES

Optimized for pole to pole distance to be up to ten times the mounting height
Minimized light spilling to the house side
Designed for European S-class (IESNA Type II/III medium or long) and roads with low speed mixed traffic
Integrated silicone gasket for IP67 rated luminaires
Well established 2X6 module based structure

TYPICAL APPLICATIONS

Residential roads
Pedestrian/bike paths
General road lighting
Outdoor lighting

RELATED PRODUCTS

CS15418_STRADA-IP-2X6-SCL

STRADA-IP-2X6-T4-B – THE BEST FORWARD-THROW BEAM ON THE MARKET

It is difficult to reach a good light uniformity for wide areas such as parking lots with current directional forwardthrow beams on the market. Now it is possible to do it with LEDiL’s new STRADA-IP-2X6-T4-B optic that has the widest beam for outdoor applications. The well-established STRADA-2X6 family with an integrated silicone gasket is designed to ensure top performance, quality and functionality from beginning to the end. Having almost a zero amount of backlight is just as a cherry at the top, which you won’t find easily from other manufacturers.

FEATURES

Forward-throw beam with powerful peak at 70 degrees (IESNA Type IV)
Well established 2X6 module based structure
Wide square-shaped beam pattern, wider than T4 optics
Integrated silicone gasket for IP67 rated products

TYPICAL APPLICATIONS

RELATED PRODUCTS

CS15158_STRADA-IP-2X6-T4-B

STRADA-2X2MX-SCL – SUPREME REACH WITH 75 DEGREES INTENSITY PEAK

LEDiL’s 2X2MX-series designed for super high-power LEDs grows with a scaled up version from the regular STRADA-2X2-SCL. The ingenious optical design in SCL-models shoots the light with intensity peak reaching as far as 75 degrees. This allows to illuminate roads with the pole to pole distance being up to ten times the mounting height. Special attention has been given to minimize the light spilling to the house side as well. With integrated silicone gasket STRADA-2X2MX-SCL is protected against dirt and dust for up to IP67 rated luminaries.

FEATURES

Standard 90 x 90 mm 2X2MX footprint
Very wide beam pattern falling between IESNA Type II and Type III long distributions
Designed to fulfill European S-class standard
Optimized LED spacing for excellent performance and thermal design
Integrated silicone gasket for up to IP67 rated luminaires

TYPICAL APPLICATIONS

Street lighting
General road lighting
Outdoor area lighting
Pedestrian lighting
Residential lighting

RELATED PRODUCTS

CS15761_STRADA-2X2MX-8-SCL

CARMEN – 70 MM COB OPTIC WITH 10˚ BEAM (NO HALO)

CARMEN is a completely renewed reflector design that can take better advantage of all the light emitted by the light source. This hybrid of transparent reflector and lens maximizes the optical performance – when compared to other metal coated reflectors – with sharp cut-off and eliminated haloing effects. Combined with the LEDiL´s patented RZ-technology providing a smooth light pattern without any color-over-angle problems. CARMEN also works as a cover to protect the LED both physically and visually, and the surrounding black holder ensures low UGR ratings for the applications.

FEATURES

Patent pending hybrid lens family with 10° ultra-narrow beam
Higher performance compared to similar metallized reflector designs in the market
Dust- and TouchProof design
No halos or light spilling = higher intensity and less glare
Comes with black reflector, especially optimised for low UGR applications
Standard retail and track lighting beams available

TYPICAL APPLICATIONS

Track lighting
Retail and supermarkets
Industrial lighting
Outdoor architectural
General indoor lighting

RELATED PRODUCTS

CP15212_CARMEN-S-B CP15215_CARMEN-M-B CP15313_CARMEN-W-B

LEDiL’S NEW ZORYA – ~360° SILICONE OPTIC FOR RETROFITS

LEDiL proudly presents ZORYA, a highly efficient silicone molded LED optic that mimics a traditional light bulb beam pattern. Due to the combination of LEDiL´s expertise in optic design and silicone molded lenses, one ZORYA is compatible with COB’s capable of luminous flux over 10 000 lumens. This incandescent lens is compatible with a large variety of LES sizes from 6 mm to 24 mm and yet able to achieve a substantial amount of backlight. With ZORYA there is no need for separate dome structures on top of the optics and you can easily achieve IP-ratings needed for the application.

FEATURES

Energy Star standards fulfilling omnidirectional lens
Twist and lock holder system allows the lens to be used with solderless connectors
High efficiency (95 %) with excellent UV, heat, impact and ingress protection
Can be used as it is, or with external protective cover

TYPICAL APPLICATIONS

Retrofits
Walkway lighting
Industrial lighting
Garden lights

RELATED PRODUCTS

F15074_ZORYA-SC FP15073_ZORYA-SC-B

STRADA-2X2MXS-DWC2 – SILICONE 2X2MX FOR 7070 PACKAGES

As you probably have noticed, LEDiL is constantly improving products while maintaining well-established module structures allowing wider compatibility and future-proof assemblies. Now it is time to introduce the new 2X2MXS, a silicone lens that guarantees your outdoor luminaries do not shy away in bad weather conditions or get damaged by physical impacts. Sharing the same 90 x 90 mm footprint as the 2X2MX released last year and enforced with the durable frame gives you the perfect package to build your winning long lasting luminaires. Not to forget exceptional thermal and UV resistance – naturally.

FEATURES

Part of LEDiL standard (90 x 90 mm) 2X2MX platform now in silicone
Best choice for high temperature applications
High UV, thermal and impact resistance
Completely sealed structure with 8 screws for IP67

TYPICAL APPLICATIONS

Both indoor and outdoor applications
Halls, arenas, roads, pathways etc.
Applications with high lumen outputs

RELATED PRODUCTS

FP14825_STRADA-2X2MXS-DWC2

FLORENCE-O – PLEASING LIGHTING TO ANY INDOOR APPLICATION

Tired of the flickering and power consuming fluorescent lights that take ages to turn on? LEDiL’s FLORENCE products are here to help you when making the change into all-satisfying and uniform LED lighting. Packed with 33 optics in a neat single array and compatibility with the commonly used 3X11 PCBs for mid-power LEDs gives you a well-established foundation to build on. The most recent addition to this lineup is FLORENCE-O with beautiful oval light distribution; optimized for non-glaring indoor light applications.

FEATURES

Addition to FLORENCE-3R family with an oval shape light distribution
Low glare and possibility to enhance with 3R glare shield
Good uniform light pattern
Designed to replace fluorecent lights

TYPICAL APPLICATIONS

Warehouse lighting
Retail lighting
Office lighting
Low bay
High bay

RELATED PRODUCTS

F15069_FLORENCE-O

TWO NEW BEAM VARIANTS TO COMPLETE RONDA PRODUCT FAMILY

RONDA-WAS2 – Flat wall washer lens ideal for floor installations

FEATURES

Designed to be installed on floor level, but can also be installed in ceiling
Flat top surface allow lenses to be covered with protective glass
Wider horizontal spread allows luminaire spacing to be increased from 1.0 to 1.25 and even 1.5
1:3 installation ratio (luminaires distance from the wall and room height)

TYPICAL APPLICATIONS

RONDA-O – Oval beam to complete RONDA product family

FEATURES

Oval light distribution with 1:2 ratio (dependent on the LED)
Ideal for hallways and aisles
Compatible with COBs with 10 to 14 size LES

TYPICAL APPLICATIONS

Indoor architectural lighting
Aisle lighting
Wall washing
Downlight applications
Track lighting

RELATED PRODUCTS

FN15977_RONDA-WAS2 FN15978_RONDA-WAS2-B FN15975_RONDA-WAS2-C FN15993_RONDA-O FN15997_RONDA-O-B FN15998_RONDA-O-C

SAGA-S – THE SAGA CONTINUES

Precise and durable silicone lenses are LEDiL’s pride and joy when talked about future of LED lights. They provide excellent thermal resistance, ingenious design elements and high efficiency rates. The new SAGA-S steps up to the arena of spot lights with ingress protection against dust and dirt up to IP67. The hyper reflective white frame helps to achieve a stylish look and reduce unwanted glare.

FEATURES

Very good thermal, impact and UV resistance
Innovative hybrid design with precision molded silicone
Hyper reflective white frame to reduce glare
Ingress protection up to IP67

TYPICAL APPLICATIONS

Low bay lighting
Architectural lighting
Industrial lighting
Hospitality lighting
Down lighting
Track lighting

TINA2-O-WAS – SMALL WALL WASHER WITH OVAL LIGHT DISTRIBUTION

Well-made artistic and architectural lighting can be delightful and uplifting to see in everyday life. LEDiL’s range of smaller size optics designed for good quality wall-washing applications are a perfect match for this purpose. The asymmetric oval light distribution ensures an exciting and uniform looking illuminance whether being aimed at smooth or rough surfaces. Latest addition to this lineup is TINA2-O-WAS. Our smallest optic designed for wall-washing applications gives you the freedom to create beautiful lighting while keeping the light sources easily out of sight.

FEATURES

Asymmetric oval light distribution
Small 16 mm diameter
Can be used as a standalone solution or part of the FLORENTINA assembly
Comes with a preassembled adhesive tape

TYPICAL APPLICATIONS

Wall washing

FLORENCE-1R-GC-Z90 – QUALITY INDOOR LIGHTING FOR MULTIPLE APPLICATIONS

FLORENCE-1R-GC-Z90 is the first in a series of linear optics with improved longitudinal glare control features. Its optimal LED count and spacing guarantees low UGR results with an excellent light distribution ratio to the given area. FLORENCE-1R-GC-Z90 has a special optical solutions to smoothen out any unwanted color-over-angle artefacts from the beam, making it the perfect solution for high-end office lighting applications.

FEATURES

Minimizes longitudinal glare for better UGR values
Optimal LED count to achieve good light distribution/UGR ratio to the desired area
Special optical solutions to remove unwanted color-over-angle artefacts
Optional clips available for easier installation and continuous rows

TYPICAL APPLICATIONS

RELATED PRODUCTS

F15216_FLORENCE-1R-GC-Z90

STRADA-SQ-FS3 – FOR TUNNELS AND SPORT FIELDS

Meet the new member of STRADA-SQ-FS3 to accompany the broad family of STRADA-SQ lenses. Directing the beam extremely far forward with the peak being in 65° it is perfectly applicable for tunnel and sport field lighting. Being just a 25 x 25 mm in size single optic supporting the latest 7070 size LED packages it has a very wide range of versatility and feasibility opportunities to offer. Requiring only a minimum of 5 mm space between lenses the customer can fully maximize their lamp lumens without having any noticeable shadings in the beam.

FEATURES

Throws light extremely far forward with the peak being in 65°
Standard SQ-series footprint and positioning pins. (Please note that beam direction differs 90 degrees from default SQ beam direction)
Designed especially for tunnel lighting
Easy installation with included adhesive tape

TYPICAL APPLICATIONS

Tunnel lighting (counter beam)
Sport fields

RELATED PRODUCTS

CA15226_STRADA-SQ-FS3

FLORENCE2-Z60 – 3R OPTICS WITH GREAT VALUE AND PERFORMANCE, NOW ALSO WITH 60° BEAM

FLORENCE2 is a lightweight 3-row linear optic family for industrial lighting. Designed with high efficiency and low UGR in mind it provides best in class performance from low to high installations. Compatibility with all Zhaga standard 3R PCBs, including the 2ft long versions, ensures you have a lighting module that is highly versatile and easy to modify for numerous luminaire fixtures.

FEATURES

285 x 64.2 mm
Lighter than original FLORENCE-3R optics with wider compatibility
Very high efficiency
UGR optimized for a glare free experience
Possible to build continuous fixtures without gaps
Screw fastening similar to previous FLORENCE versions

TYPICAL APPLICATIONS

Industrial lighting
Fluorescent lamp replacement

LINNEA-UP – FOR A PLEASENT AND GLARE-FREE EXPERIENCE

A uniform ceiling light that not only makes the space cosy and bright but also helps to reduce glare in offices and other indoor spaces.

FEATURES

280 x 40 mm linear lens with low profile
Very wide sideway throwing light spread for uplighting
Durable design made from PC
Quick to assemble with integrated clips
End cap accessories available

TYPICAL APPLICATIONS

STELLA-RS – Ø90 MM SILICONE OPTICS WITH ~30° SPOT BEAM

FEATURES

Massive lumen output with high intensity peak
Minimum spill light and glare on high mast setups
Designed with consideration to the whole system cost
Ideal for floodlighting and sports fields
Excellent thermal, UV and impact resistance
Optimized for 23 mm and compatible with up to 30 mm LES size COBs

TYPICAL APPLICATIONS

LINNEA-60 – ~60° + 90° LIGHT DISTRIBUTION FOR MID POWER MODULES

New beam to LINNEA family

FEATURES

Low profile polycarbonate lens (280 x 40 x 12 mm)
Advanced optical control with great color uniformity and reduced longitudinal glare
Extremely fast to assemble with integrated clips and optional end caps
Variants for 1 mm and 0.5 mm thick installation surfaces

TYPICAL APPLICATIONS

RELATED PRODUCTS

F15524_LINNEA-60 F15941_LINNEA-60-B

STRADA-2X2-FW AND IP-2X6-FW – FORWARD WIDE LIGHT DISTRIBUTION IN LEDiL STANDARDIZED FORM FACTORS

FEATURES

Type III universal street lighting beam
Very little backwards facing light
Great illuminance uniformity
Illuminates a road width up to 2 times the mounting height, especially in staggered pole configuration

TYPICAL APPLICATIONS

Street lighting
High mast lighting

STRADA-2X2-MEW – FIRST LENS FROM LEDiL ESPECIALLY FOR WET ROADS

FEATURES

Meets Nordic wet street lighting requirements MEW and can also be used globally (Type II short, full cutoff)
Has extremely low glare (luminous intensity class G6 in Europe / IESNA Full cutoff)
Light is uniformly distributed between two lanes to decrease reflections
Good for poles with -1 to -2.5m overhang

TYPICAL APPLICATIONS

Street lighting

STRADA-SQ-T2-B – A NEW T2 BEAM WITH MINIMIZED BACKLIGHT

FEATURES

IESNA Type II light distribution
Minimized backlight on the house side
Exceptionally suitable for residentialareas – no need to shield the luminaire
Can be ordered with or without installation tape

TYPICAL APPLICATIONS

Street lighting

FLORENCE-1R-GC – WITH MINIMIZED LONGITUDINAL GLARE

FLORENCE-1R-GC series of optics gives you the control you need to create high quality indoor lighting. A linear form with 24 individual TIR optics provides unsurpassed light control with minimized longitudinal glare. The special optical solution also removes any unwanted color-over-angle artifacts from the beam. These characteristics are the basis of all beams in the product family resulting in a superior lighting experience and low UGR. The narrow design and low profile makes it possible to design contemporary, slim luminaires as well as the possibility to use the lenses in a variety of ways – from recessed and general lighting to uplighters and wall washing applications.

FEATURES

24 individual optics for better light control
Minimized longitudinal glare for low UGR values
Special optical solutions to remove unwanted color-over-angle artefacts
Optional clips available for easier installation and to form continuous rows

TYPICAL APPLICATIONS

LINNEA-90 – A NEW 40 MM WIDE LINEAR LENS FOR MID POWER LEDS

LEDiL proudly presents LINNEA – a new low profile linear product family for indoor lighting. A perfect solution for many applications, LINNEA optics are aesthetically pleasing in both their design and the light they produce. In addition they are easy to assemble and are compatible with a wide range of PCBs. Linking optics together onto the PCB is fast and easy, resulting in a seamless construction. The diffused lens surface provides uniform color reproduction a homogenous lens surface and less glare. LINNEA supports most commonly used 24 mm and 20 mm wide PCBs and this, together with the freedom to use LINNEA with any LED pitch, allows a wide degree of compatibility. The large number of different beam solutions that will be added in the future will further expand the ways you can use this flexible family in the years to come.

FEATURES

40 mm wide PC lens with a diffused surface and a low profile
Range of symmetrical and asymmetrical beams with 90˚ beam coming first
Solid construction and optional end caps to finalize the look and to protect from excessive dust

TYPICAL APPLICATIONS

Fluorecent lamp replacements
Industrial lighting
Office lighting
Retail lighting
Pendant luminaires
Garages and canopies

STRADELLA-CY – SMALL SINGLE OPTIC FOR EFFICIENT CANOPY LIGHTING

STRADELLA-CY is a single optic that measures just 14 x 14 mm and meets the requirements for modern canopy lighting. Whether you need to illuminate petrol stations or covered public spaces you can design luminaires that make the most of the LED performance and cost efficiency. These tiny optics are capable of high luminosity with both mid- and high power LEDs leaving more room for innovative luminaire design and installation options. Lenses can be stacked right next to each other or distributed in a more widespread fashion and still perform as intended. STRADELLA-CY offers compatibility, versatility and cost efficiency in a high performance small package for canopy lighting all over the world.

FEATURES

Cost efficient, excellent performance and light control
14×14 mm single optics

TYPICAL APPLICATIONS

Outdoor area lighting
Canopy lighting

RELATED PRODUCTS

C15437_STRADELLA-CY

STRADELLA-8-VSM AND –SCL – NEW OUTDOOR AREA BEAMS FOR MORE COST EFFICIENT LIGHTING

LEDiL’s STRADELLA product family grows with two new optical solutions for street and outdoor lighting. With a wide, uniform square-shaped beam STRADELLA-8-VSM is an ideal solution for parking lots, whereas STRADELLA-8-SCL is meant for street lighting where lamp posts are spaced at longer distances from each other. The standardized 50x50mm module platform, complete with 8 individual optics, offers a huge amount of light from a relatively small area. Support for both mid- and high-power LEDs makes STRADELLA a practical, economical and high performance solution for today’s ecological needs.

FEATURES

Cost efficient, excellent performance and light control
8 individual optics module in 50×50 mm footprint
STRADELLA-8-SCL designed for very long pole to pole distance street lighting
STRADELLA-8-VSM with symmetrical and uniform square-shaped beam ideal for parking lots

TYPICAL APPLICATIONS

RELATED PRODUCTS

C15481_STRADELLA-8-VSM C15677_STRADELLA-8-SCL

STELLA-HB-WWW – COST OPTIMIZED SOLUTION FOR HIGH BAY APPLICATIONS

High bay lighting – if any – needs to be durable, luminous and very efficient. Being used on a daily basis, oftentimes even for 24 hours a day, sets the requirements for lighting very high. Generation of heat from the luminaire itself, ambient temperature at higher altitudes and constant amount of dust floating around. Yet able to deliver accurate levels of lighting that would keep the eyes sharp for the task. Now with the LEDiL’s low cost silicone optics of STELLA-HB-WWW this is easier than ever. Self-sealing optics design helps to keep dust and moisture away for up to IP67 rating, and the high thermal and UV resistance provides long-term functionality. Very wide light distribution from longer installation heights, low profile design and a large space reserved for connectors inside the optics at just the right price.

FEATURES

Low profile design
Very good thermal and UV resistance
Maximum connector size: diameter 52 mm, height 6 mm

TYPICAL APPLICATIONS

Industrial lighting
High bay
Warehouses

RELATED PRODUCTS

FN15264_STELLA-HB-WWW

STELLA-VSM – WIDE AREA LIGHTING WITH TYPE V LIGHT DISTRIBUTION

LEDiL’s latest addition to the world of silicone optics is STELLA-VSM. IESNA Type V light distribution with symmetric squareshaped beam provides perfect illumination for large outdoor areas such as parking lots. More heat or prolonged exposures to UV – the functionality remains the same. The self-sealing optics design allow ingress protection against dirt, dust and moisture up to IP67 rating. Compatibility with the latest COBs from a range of manufacturers guarantees you have enough power to back up your applications.

FEATURES

TYPE V symmetrical square-shaped light distribution
More space for connectors reserved at the bottom (like in other new STELLA-optics)
Maximum connector size: diameter 52 mm, height 3.7 mm

TYPICAL APPLICATIONS

Wide area lighting

RELATED PRODUCTS

FN15379_STELLA-VSM

ROSE-MRK– QUALITY LIGHTING FOR BIGGER LEDS

ROSEs are white, LEDs light is pure – and what a combination it is when you combine the two. LEDiL´s ROSE product family has been upgraded with the new MRK series to bloom with bigger 7070 size LED packages. Having the same outer dimensions as the previously released ROSE-products they are compatible with numerous different lighting fixtures straight away. The lenses come preassembled in lightweight and durable holders with a long lasting fastening tape that makes their installation fast and easy. So whether you are upgrading or building new luminaries for larger LED packages, LEDiL’s ROSE-MRK is extremely efficient and trusted portfolio to build on.

FEATURES

Lens made out of PC

TYPICAL APPLICATIONS

Indoor lighting
General lighting
Spot lights
Up- and downlights

STRADA-2X2-CAT-B – PRECISE CATENARY LIGHTING

Wire suspended luminaires – especially in the older cities – are usually on places with heavy and mixed traffic. These special conditions require exact care and functionality from the lighting. LEDiL’s new STRADA-2X2-CAT-B is a reformed version for these applications. STRADA-2X2-CAT-B delivers a narrow and low glare beam with an excellent cutoff. The modified structure from the TATIANA optics (designed for Russian roads) ensures that it is also compatible with 15-degree boom angle poles.

FEATURES

Narrower beam than with STRADA-2X2-CAT
Optical design identical to Tatiana lens
Can also be used with poles that have 15-degree boom angle
Good illuminance and luminance uniformity

TYPICAL APPLICATIONS

Catenary luminaires
Street lighting with arm inclination (boom angle ~15 deg)
Tunnel lighting

RELATED PRODUCTS

C15217_STRADA-2X2-CAT-B

FLORENCE-ZT25-S – ASYMMETRIC OVAL LIGHT FOR RETAIL AND WALL-WASHING

LEDiL’s FLORENCE-family is especially designed as a replacement for the old fluorescent light rows. FLORENCE-ZT25-S gives an optimized one-sided illumination to the products and other valuables you need to showcase on shelves. The twenty-degree and uniform beam shines just to the right place providing you the extra punch you need for your goods. As usual, LEDiL’s products are rarely suitable just for one purpose, so ZT25-S can also be used in wall-washing and architectural applications. For more information please contact your local LEDiL sales personnel and boost your product visibility to the max.

FEATURES

Single-sided asymmetric oval light pattern
Optimized beam to give uniform illumination to the products on shelves
Designed especially for store aisle environments
FLORENCE-family suits perfectly for replacing old fluorescent lights
Please note that C14437_FLORENCE-PF-3R cannot be used to fasten this optic

TYPICAL APPLICATIONS

RELATED PRODUCTS

F15244_FLORENCE-ZT25-S

BROOKE-G2 – 45 MM REFLECTOR FAMILY FOR COBS

BROOKE-G2 family is a series of compact sized (D45 mm) reflectors to set a new standard for socket based LED lighting. The system is optimized for lighting manufacturers to construct more compact sized luminaires with modern high density COBs that have smaller LES’s. In addition LEDiL’s patented BARBARA-RZ color mixing sublens can be attached between the reflector and the holder for multi-colour or tunable white light applications. The lens can also be used to smoothen out and remove any unwanted color-over-angle artefacts from the beam. Durable, adaptive and user-friendly, that’s what the new BROOKE-G2 is about.

FEATURES

S, M and W variants
Range of LEDiL sockets for different COBs
Optional color mixing sublens allows smoother light distribution with patented color mixing features BROOKE GenII – 45 mm reflector family for COBs

TYPICAL APPLICATIONS

Directional indoor architectural luminaires
Track lighting
Recessed downlights
Retail lighting

RELATED PRODUCTS

F14738_BROOKE-G2-S F14739_BROOKE-G2-M F14740_BROOKE-G2-W

HORTICULTURAL LIGHTING WITH LEDiL’S VIRPI OPTICS

Take control of the seasons and maximize the yield of your crop with fully optimized and highly efficient LED lighting. With the collaboration of the high-end manufacturers of LUMILEDS and LEDiL you can get the exact lighting recipe you need for your plants. With 8 pre-programmed lighting recipes for seedlings, vegetative growth, flowering and photoperiodism – just to name a few – and the possibility to create your own perfect lighting combination allows your plants to have excellent conditions to grow all year round.

LEDiL’S VIRPI OPTICS FOR HORTICULTURAL LIGHTING

LEDiL´s VIRPI optical arrays are perfectly balanced with precision and power for horticultural lighting. The tight clustering between the lenses combined with a special optical design produces uniform and pleasant lighting even when used with a mixture of different LEDs. The collaboration with the top LED manufacturers allows optimization and lumen output to be fine-tuned to their maximum level, and letting you to have the best possible and efficient lighting you need.

FEATURES

Dimensions: 74.9 x 74.9 mm, Height: 9.4 mm
5X5 cluster for 25 High Power LEDs
Beams available: S – 14° / M – 28°/ W – 42°
Optimized precision with high luminance levels
Precision-molded from optical grade PMMA – UL94 HB rated material with operating rating -40°C to +80°C

TYPICAL APPLICATIONS

Greenhouses
Horticulture
Research
Retail

RELATED PRODUCTS

C12607_VIRPI-S C12608_VIRPI-M C12609_VIRPI-W

STRADA-IP-2X6-T2-B & T3-B – TYPE II/III (MEDIUM) STREET LIGHTING IMPROVED

LEDiL proudly presents the new 2X6 module designed for the IESNA Type 2 and 3 street lighting. These new “-B” versions are revised from the well known -T2 and -T3 designs, maintaining close to identical beam performance and functionality, but with reduced house-side spill light. These “facelift” versions are especially recommended for new designs, but can be quickly adapted into earlier designs bringing the performance close to perfection. Both versions include an integrated silicone gasket to allow IP67 rated luminaires.

FEATURES

IESNA Type II/III beams (also suitable for European ME & S classes) with excellent performance, uniformity and durability
Wide square-shaped beam pattern
Well established 2X6 module based structure
Integrated silicone gasket for IP67 rated products

TYPICAL APPLICATIONS

RELATED PRODUCTS

CS15363_STRADA-IP-2X6-T2-B CS15362_STRADA-IP-2X6-T3-B

STRADA-IP-2X6-VSM – DESIGNED TO COVER WIDE AREAS OUTDOORS

LEDiL’s 2X6 modules, the proven solution for outdoor lighting now expands with the VSM-optic model. STRADA-IP-2X6-VSM provides a uniform, symmetrical and wide square-shaped beam that can illuminate larger areas with ease. The integrated silicone gasket provides ingress protection up to IP67 to keep dirt, dust and moisture away from the luminaire. A Standardized module based structure allows easy replacements and future upgrades to the same luminaire fixture. STRADA-IP-2X6-VSM is compatible with up to 5050 sized LED packages with the typical efficiency being 96 %.

FEATURES

Symmetrical wide square beam (IESNA Type VS)
Typical luminaire classifying IESNA Semi Cutoff or G1-G2 luminous intensity class (EN13201)
Ingress protection up to IP67 with integrated silicone gasket
For LED packages up to 5050 size

TYPICAL APPLICATIONS

Wide outdoor area lighting

RELATED PRODUCTS

CS15020_STRADA-IP-2X6-VSM

LEDiL’S NEW OLIVIA – EXPLORE NEW LIGHTING POSSIBILITIES IN RETAIL AND MUSEUMS

LEDiL launches a new unique 70 mm optic for mid-sized COBs. The new OLIVIA-S is a spot lens designed with typical FWHM of 15-20°, subject to the LES size. The OLIVIA family will be exbanded shortly with additional beam angles. The OLIVIA is optimized for decorative lighting for shops and museums.
The OLIVIA lens works with a range of COB’s with LES size up to 19 mm and the lens system is designed to work with Zhaga compliant solderless connectors from a range of manufacturers. OLIVIA’s really flat (only 22.6 mm) optical design is achieved with unique folded TIR principle and it’s efficient dual-element design minimizes low point glare.

FEATURES

Works with a range of COB’s with LES size up to 19 mm
Typical FWHM with spot optics 15-20°, depending on the LES size
Really flat lens achieved with unique folded TIR design
Compatible with Zhaga book 3 compliant solderless connectors from a range of manufacturers
Efficient dual-element design with low point glare

TYPICAL APPLICATIONS

Track lighting and downlights for shops and museums

LEDiL’S NEW JENNY-T4 – FOR PARKING LOT AND AREA LIGHTING

LEDiL’s JENNY family of silicone molded optics expands with the new JENNY-T4 version. JENNY-T4 features Type IV light distribution and typical applications include area lighting applications, such as parking lots or complex roads with conflict areas. As a part of the cost effective silicone lens family JENNY-T4 is designed to work with a range COBs with smaller LES’s (up to 10 mm) and 4-chip high power LEDs. This helps to achieve the desired luminous flux from a relatively compact light fixture. JENNY-T4 can be used as single optics or in array configurations and it is available as a single lens or in a 8X1 module. JENNY features easy positioning with pins and installation by gluing or with additional holder.

FEATURES

IESNA Type IV light distribution
For small and mid-size COB’s
Excellent thermal withstanding
Easy to achieve ingress protected luminaire design by using glue for installation

TYPICAL APPLICATIONS

LEDiL’S NEW IDA – 16-UP MODULE FAMILY FOR MID-POWER LEDS

IDA is LEDiL’s new module family for mid-power LEDs up to 3535. 50 x 50 mm lens array contains 16 lenses with 12.5 mm pitch which can be kept continuous when more than one units are used in row. There’s also a possibility to use only the lens or lens and optional clip-on installation frame which holds the optics in place. The IDA lens array family consists of medium, very wide flood and oval light distributions. IDA optics are designed especially quality office lighting in mind.

FEATURES

Good color rendering and uniformity with a range of quality mid-power LEDs from suppliers like Osram, Philips Lumileds and Nichia
Seamless and continuous installation of multiple modules for uniform appearance
Compact form factor
High flux output of over 2000 lm per module can be achieved
Easy installation with clips in the holder frame

TYPICAL APPLICATIONS

Office lighting
Compact downlights
https://www.ledil.com/application-areas/industrial-lighting/#startMid- and low-bays

VERONICA-SQ-MINI OPTICS – SIMPLIFYING YOUR OUTDOOR LIGHT BOXES

LEDiL’s VERONICA family expands with two new VERONICA-SQ-MINI sisters, VERONICA-SQ-MINI-RS with 15 degree spot beam and VERONICA-SQ-MINI-O feturing 15 + 50 degree oval beam.The efficient optical performance of VERONICA-SQ-MINI optics combined with the small 13.9 x 13.9 mm size allows high lumen output from compact lighting fixture for challenging environments. These easily sealable optics feature square flange with tape for easy potting and are especially designed for harsh outdoor and indoor environments. The VERONICA-SQ-MINI sisters are compatible with a range of high power LEDs from brands like Cree, Osram and Philips Lumileds.

FEATURES

Two optical versions: Real Spot and Oval
Solid and sealed optic developed especially for harsh outdoor and indoor environments
Square flange with tape for easy potting
Small 13.9 x 13.9 mm size with competent optical performance allows high lumen output from compact light fixture
Compatible with a range of high power LED types up to XP-E2 size

TYPICAL APPLICATIONS

Outdoor architectural lighting
Facade lighting
Display and billboard lighting

LEDiL’S STELLA FAMILY GROWS – MEET THE -T4, SIMPLE SOLUTION FOR PARKING LOTS AND AREA LIGHTING

LEDiL expands its ingeniuous STELLA family of silicone optics with a new STELLA-T4. Having an IESNA Type IV short light distribution, it’s a perfect one lens solution for illumination of parking lots and other area lighting applications. STELLA-T4 has an even light distribution with a good cutoff charasteristics. It’s design is optimized for minimal backlight on the house side. STELLA-T4 is designed to work with a range of COBs from brands like Cree, Citizen, Bridgelux and Osram with variety of LES sizes. STELLA-T4 works also with various COBs together with IDEAL Chip-Lok Jr. COB array holder.

FEATURES

Self-sealing design simplifies luminaire design
Very good thermal and UV resistance
Type IV light distribution with wide variety of LES sizes
Excellent efficiency
Special features for backlight minimization
Precise light control and good cut-off
Special features to prevent house-side peaks

TYPICAL APPLICATIONS

STRADA-2X2-NHS – EFFICIENT URBAN LIGHTING

LEDiL introduces a new member to the STRADA-2X2 module family, asymmetric STRADA-2X2-NHS suitable for urban lighting. The special optical design of STRADA-2X2-NHS minimizes light falling on the house side which makes it particularly suitable for wall-pack lighting and area lighting for example in parks.

FEATURES

Wide light distribution allows longer distances between luminaires
Minimized light fall on the house side
Highly efficient design (93 % typ. without glass)
Compatible with LEDiL standard 2X2 footprint

TYPICAL APPLICATIONS

Wall-pack lighting
Area lighting
Park lighting